面向义齿技工室负责人和管理者

LabSync日记账

关于义齿技工室经营的实用笔记——成本核算、产能、返工，以及背后的数字。

  • 5 文章
  • 6 栏目
  • 22 Jul 2026 最新
RSS Atom
Dental Lab Turnaround Time: Where the Days Go and How to Cut Them
精选 Production

Dental Lab Turnaround Time: Where the Days Go and How to Cut Them

Turnaround time in a dental laboratory averages 7–10 working days for a single crown, but only 2–3 days of that span is actual hands-on production. The rest is case queuing, material transit, furnace batch waits and communication lag—all compressible without sacrificing fit or aesthetics.

Super Admin 6 分钟阅读

最新文章

A monitor showing a 3D digital dental arch mesh in a darkened lab workstation with a red tool on the desk.

Digital Workflow

Digital Impression Quality: Lab-Side STL Scan Checklist

A structured STL intake protocol verifying margin definition, interproximal contacts, antagonist capture and file integrity in 15 minutes flags unworkable scans before design starts. Labs using a formal digital impression quality checklist report remake rates dropping from 8–12% to 3–5%.

Super Admin 9 分钟阅读
A "Price Schedule" document lies on a lab counter with dental tools, models, and a caliper.

Lab Economics

Dental Lab Pricing: How to Build a Defensible Price List

A defensible dental lab price list starts with accurate cost per unit—direct materials, labor, equipment time and allocated overhead—then applies margin targets by case complexity. Most labs under-price by 15–30% because they ignore machine time, QC labor and remake reserves.

Super Admin 7 分钟阅读
A single ceramic dental crown with a small red dot rests on a grey tray next to a sealed envelope, with a blurred lab bench in the background.

Quality & Remakes

Dental Lab Remake Rate: Benchmarks, Measurement & Cost

A good dental lab remake rate sits between 2% and 4% of shipped units, measured as remakes divided by total cases delivered in a rolling 30-day window. Every percentage point above 4% costs a mid-sized lab $45,000 per year in direct labor, materials and lost throughput.

Super Admin 11 分钟阅读
Two dental crowns, one light and one yellowish, on a gray counter in a dental lab.

Materials

Monolithic Zirconia vs IPS e.max for Posterior Crowns

Monolithic zirconia delivers flexural strength above 900 MPa and suits bruxers and minimal-prep cases; IPS e.max CAD offers superior translucency and marginal accuracy below 50 µm for aesthetic premolars. Labs choose by occlusal load, prep depth and shade match requirements.

Super Admin 7 分钟阅读
Dental lab with a single tooth crown on a grey tray, next to a red folder.

Lab Economics

Full-Arch Remake Cost: What Labs Actually Lose Per Case

A full-arch remake typically costs a dental laboratory between $420 and $680 in direct expenses, depending on material choice and technician seniority. Most labs absorb this loss entirely, eroding lab profitability by 8–12% annually when remake rates exceed 3%.

Super Admin 6 分钟阅读

数字背后

这里的每个数字，您的技工室都已经在产生。

单例成本、返工率、瓷盘利用率、未开票工作。LabSync 从您的实际生产中读取这些数据，而不是凭记忆。我们将带您逐一了解。

预约演示

15分钟。我们看的是您的真实数据，而不是幻灯片。